On this page
  1. The legs and pelvis have different jobs
  2. What changes when your hands are under your butt?
  3. Check for a small pelvic curl first
  4. Start with an assisted sit-up if you need help curling
  5. Then use the lying-leg progressions
  6. Bent-knee reverse crunch
  7. One straight leg and one bent leg
  8. Two straight legs
  9. Change one part of the exercise at a time

Watch your pelvis during a lying leg raise. In the version I show here, you lower the legs through a range you can control, then add a small curl of the pelvis toward the ribs. Bend your knees or shorten the movement when the straight-leg version is too difficult.

Feeling the front of your hips doesn't automatically mean the exercise is wrong. Your hip flexors help lift the legs. The useful question is whether you can also control the trunk and pelvis while that happens.

The legs and pelvis have different jobs

When the thighs move toward your torso, that's hip flexion. The abdominal muscles can help hold the pelvis steady against the pull of the legs, and they can also bring the pelvis and ribs closer together during a curl.

Your abs can work while holding the pelvis still. A study measuring abdominal and thigh-muscle activity during leg raises found activity in both the rectus abdominis and rectus femoris, with the relationship changing across the movement. It measured activity during the exercise in twenty healthy adults; it didn't measure long-term muscle growth.

For the version I'm teaching, look for a controlled lowering phase and a deliberate pelvic curl. If the ribs lift, the pelvis tips forward and the lower back arches more as you lower, stop the rep before that change. You've reached the range you can currently control in that setup.

You don't need to drive the back into the floor painfully or force your heels to touch the ground. Use a comfortable position that you can repeat. The comparison is between your controlled rep and the point where you start losing it.

What changes when your hands are under your butt?

Your hands provide support beneath the pelvis and change its starting position. That can let your legs travel farther while the support helps hold the pelvis. You can see the change in the demonstration, although it doesn't establish that the abdominal muscles become inactive.

A supported leg raise can be an intentional easier version. Just record it that way. You may need a shorter range once you take the hands away, even if you could reach the floor with their support.

If you want to practice control with the arms beside you, bend the knees, stop the legs higher or use a reverse crunch. These give you ways to reduce the difficulty without relying on the hand support. The floor is not a finish line.

Check for a small pelvic curl first

Lie on your back with the hips and knees bent to roughly right angles. Exhale and bring the belt line toward the ribs, lifting the tailbone a small distance from the floor. Avoid throwing the knees toward your face or pushing hard through your arms.

The movement can be only an inch or two. Lower slowly and see whether you can repeat it. If that is difficult to create, start with the assisted trunk-curl option below.

When the curl is controlled, try slowly lowering one heel while keeping the rib and pelvis position steady. Stop where that position begins to change. This is a way to choose a practice range; it isn't a diagnosis or a score of your entire core strength. Where you feel a burn is only one part of the picture.

Start with an assisted sit-up if you need help curling

In the video I use a band-assisted sit-up as an accessible starting option. Lie facing a low, secure anchor with bent knees and hold the band between the legs so it helps you curl the torso forward.

Use equipment and an anchor intended to take the load. Check both before starting and keep the band out of the face path. If you can't arrange a secure setup, use a smaller unassisted curl that you can control instead of improvising an anchor.

Exhale, bring the ribs toward the pelvis and lift smoothly. Don't yank the band or throw your head forward to start. As the movement gets easier, reduce the assistance. The purpose here is to practice controlled trunk flexion before asking the legs to create a longer lever.

Then use the lying-leg progressions

Bent-knee reverse crunch

Keep the hips and knees bent. Curl the pelvis toward the ribs, pause briefly and lower under control. If you need a running start from the legs, reduce the movement until the pelvis rolls without that swing.

One straight leg and one bent leg

Straighten one leg and place the foot of the bent leg along it. I like this version because your own leg becomes a measuring stick. As you improve, move that foot farther down the straight leg so the bent leg gradually lengthens too.

Record where you placed the foot. That makes the setup more repeatable than choosing a different knee bend each time. Keep the same controlled lowering and pelvic curl as the lever gets longer.

Two straight legs

Straighten both knees and lower only as far as you can retain control. Return without bouncing, then curl the pelvis toward the ribs. The heels can stop well above the floor.

Keep the arms beside you for the unsupported version. If the rep starts to fall apart, bend the knees or reduce the range. You can return to that easier version within the session instead of trying to force more straight-leg reps.

Change one part of the exercise at a time

Lever length, range, assistance and speed all affect how difficult the movement is. If you straighten the knees and lower farther in the same session, you've made two changes. It becomes harder to tell which one exceeded your control.

The video's working check is six to ten controlled reps, repeated for two or three sets. When you can repeat the top end with the last rep still resembling the first, make one small change. For example, move the bent foot a little farther down the straight leg while keeping the same lowering range.

Slower lowering or a brief pause can also make a familiar version more demanding. Additional load is a later option, after you can repeat the bodyweight movement. Don't balance a hard object between your feet where it could fall onto you. Hanging raises have their own grip and control demands and aren't required to finish this lying progression.

Stop for sharp back pain, hip pinching or numbness, and get individual help if symptoms persist. These technique checks don't establish the cause of pain or guarantee that a particular position prevents injury.

Film a set from the side so the ribs, pelvis and full leg path are visible. Compare the first rep with the last, then record the version and range you could control. Use the exercise library to revisit demonstrations. The full-body band workout includes butt-ups if you want to see the small pelvic curl used within a session.

Common questions

Frequently asked questions

Does feeling my hip flexors mean a leg raise is wrong?

No. Hip flexors help lift the legs. Check whether you can also control your trunk and pelvis, use a repeatable range and perform the intended pelvic curl. Sensation alone doesn't diagnose a technique or pain problem.

References

Sources